Home / Products / Clock systems / NIS Telnu clock systems

TELNU30/RADIOCONTROLLED TELNU30

Features

• Quartz/radio-controlled master clock(with DCF antenna) with telegram output for up to 33 TELNU slave clocks
• Only a twist pair cable connection to the slave clock needed
• Time, weekday and date transmission
• Fully automatic, pre-settable summer/winter time changeover for each worldwide time zone
• Compact housing for wall mounting (with plug base for quick installation); International Protection Grade IP 40 Can also be mounted on 35 mm standard rail
• Integrated, real-time clock with 10 year power reserve
• Slave clocks are reset fully automatically after power failure
• Data backup: summer time changeover dates are non-erasably stored in the EEPROM
• Digital frequency correction via menu for precise operation
• Optical output pulse display
• Simple operation
• Option: DCF radio control or GPS satellite receiver for worldwide operation
• Power supply: 230V / 50 Hz AC ± 10%
• Power consumption: 27 VA
• Output voltage: 24 … 30 V DC
• Output current: 1A = 33 Telnu Uhren a 30mA
• Operating temperature: 0 °C … 45 °C
• Housing: polystyrene, high impact- resistant
• Protection class: IP 40

TELNU-FCSHU 500 & TELNU-ZDA3-S2 (19" Model)

• 3 adjustable TELNU LINE outputs
• 13 TELNU directly connectable slave clocks
• Mixed operation possible, for example:
  • LINE pulse slave clocks, minutes
  • LINE TELNU slave clocks
  • LINE pulse slave clocks, seconds
• 2 switching outputs (total of 324 switching times)
• Power supply 230V / 50Hz AC ± 10%
• Power consumption 15VA
• Output voltage 24 … 30V DC

TELNU-BOOSTER

For up to 83 Telnu slave clocks.

Wall-mounted booster for TELNU30 or for ZDA3-S2 in the 19" model. 2 circuits, max. 2500 mA for max. 83 TELNU slave clocks. The time information transmission as a serial DCF telegram and the power supply to the slave clocks is handled via a twist pair control cable. Optical control LED for each slave clock line output. The device is equipped with a fine wire fuse for protection against overloading.

Features

• Multiple boosters can be hooked up to a TELNU master clock to expand TELNU clock systems. This offers almost unlimited system expandability.
• Dimensions: BxHxT: 250 x 175 x 75 mm
• Order no.: K-TELNU-BOOST-W

TELNU-Booster (19" Model)

Features

• K-TELNU-BOOST19: Line Amplifier
• Power supply: 230V / 50 Hz AC ± 10%
• Power consumption: 60VA
• Max. line current: 2.5 A for total of 83 clocks a 30mA
• Weight: 1800 g
• Dimensions (WxHxD): 24TE (121.5) x 3HE (129) x 170 mm
• Order no: K-TELNU-BOOST19

TELNU-TIMER 4C

4-channel timer (slave timer) for intelligent TELNU slave clock systems

As with a TELNU slave clock, the TELNU master clock fully automatically transmits the exact time of day and the date to the TELNU Timer 4C. The TELNU Timer 4C can, of course, directly receive the time from a DCF77 or GPS radio receiver.

Features

• 4 switching/signal circuits
• Daily and weekly program
• ON, OFF or pulse switching function
• Shortest switching interval 1 second
• Manual On/Off/Auto for each channel, single/full delete for each channel
• Switching power 3A (per channel) (potential free relay contact)
• 292 programmable switching times
• Manual switching override
• Switching times can be changed
• Free block formation of weekdays, channels and switching functions
• Status display
• Manual cut-off possible
• Compact housing for wall mounting (w/ plug base for quick installation); International Protection Rating - IP 40; can also be mounted on a 35 mm standard rail